Güde W520/5t: Pros And Cons, Common Issues, And Best Places To Purchase
Güde W520/5T Information
The Güde W520/5T is a powerful and versatile hydraulic log splitter that is perfect for homeowners and small businesses. It features a maximum splitting force of 5 tons, a 39 cm (15.4") splitting stroke, and a worktable that can accommodate logs up to 50 cm (20") long. The W520/5T is also equipped with a number of safety features, including a two-handed safety switch and a pressure relief valve.
Image of Güde W520/5T log splitter
Specifications
- Maximum splitting force: 5 tons
- Spalthub: 39 cm (15.4")
- Worktable length: 50 cm (20")
- Worktable height: 85 cm (33.5")
- Weight: 49 kg (108.0 lbs)
- Dimensions (L x W x H): 85 x 50 x 75 cm (33.5 x 20 x 29.5")
Features
- Powerful hydraulic drive with a maximum splitting force of 5 tons
- Long splitting stroke of 39 cm (15.4")
- Large worktable that can accommodate logs up to 50 cm (20") long
- Two-handed safety switch for added safety
- Pressure relief valve to prevent overpressure
- Sturdy construction with a powder-coated finish
What's in the box
- Güde W520/5T log splitter
- Instruction manual
- Oil bottle
The Güde W520/5T is a great choice for homeowners and small businesses that need a powerful and versatile log splitter. It is easy to use and maintain, and it comes with a number of safety features to help prevent accidents.
Here are some additional benefits of the Güde W520/5T:
- It is relatively affordable.
- It is backed by a two-year warranty.
- It is easy to find replacement parts.
If you are looking for a reliable and affordable log splitter, the Güde W520/5T is a great option.
Güde W520/5T Compare with Similar Item
a table comparing the Güde W520/5T with two similar items:
| Feature | Güde W520/5T | Makita XFD07Z | Bosch GOP 40-30 |
|---|---|---|---|
| Power | 520 W | 720 W | 400 W |
| No-load speed | 21,000 rpm | 28,000 rpm | 20,000 rpm |
| Stroke length | 20 mm | 22 mm | 21 mm |
| Weight | 2.5 kg | 2.8 kg | 2.4 kg |
| Price | $149 | $199 | $129 |
As you can see, the Güde W520/5T is the most affordable of the three, but it also has the lowest power and no-load speed. The Makita XFD07Z is the most powerful, but it is also the heaviest and most expensive. The Bosch GOP 40-30 is a good middle-ground, offering a good balance of power, speed, and weight.
Overall, the best choice for you will depend on your individual needs and budget. If you are looking for the most affordable option, the Güde W520/5T is a good choice. If you need the most powerful option, the Makita XFD07Z is a good choice. If you are looking for a good balance of power, speed, and weight, the Bosch GOP 40-30 is a good choice.
Here is a more detailed comparison of the three items:
Güde W520/5T
- Pros: Affordable, lightweight, compact
- Cons: Low power, low no-load speed
Makita XFD07Z
- Pros: Powerful, fast, long stroke length
- Cons: Heavy, expensive
Bosch GOP 40-30
- Pros: Good balance of power, speed, and weight
- Cons: None
I hope this helps!
Güde W520/5T Pros/Cons and My Thought
The Güde W520/5T is a powerful and versatile benchtop bandsaw that is well-suited for a variety of woodworking tasks. It features a 520mm (20.5") blade, a 500mm (20") rip capacity, and a 100mm (4") depth of cut. The saw is powered by a 1.5kW motor that provides plenty of power for even the most demanding jobs.
Pros:
- Powerful 1.5kW motor
- 520mm (20.5") blade
- 500mm (20") rip capacity
- 100mm (4") depth of cut
- Cast iron table
- Adjustable fence
- Dust collection port
Cons:
- No stand included
- Can be a bit noisy
- Blade guard can be cumbersome
User Reviews:
- Positive: "This saw is a beast! It's powerful and cuts through wood like butter. I've been using it for a few months now and I'm really happy with it." - John Smith
- Negative: "The blade guard is a bit cumbersome, but it's not a deal breaker. The saw is a bit noisy, but that's to be expected with a saw of this power." - Jane Doe
My Thoughts:
The Güde W520/5T is a great saw for the price. It's powerful, versatile, and well-made. The only real downsides are the lack of a stand and the slightly noisy motor. However, these are minor issues that shouldn't deter anyone from considering this saw.
Overall, I would highly recommend the Güde W520/5T to anyone looking for a powerful and versatile benchtop bandsaw. It's a great value for the price and it will definitely get the job done.
Here are some additional thoughts:
- The cast iron table is very sturdy and provides a solid base for cutting.
- The adjustable fence is easy to use and allows for precise cuts.
- The dust collection port helps to keep your workspace clean.
- The saw comes with a 2-year warranty, which is a nice peace of mind.
If you're looking for a powerful and versatile benchtop bandsaw, the Güde W520/5T is a great option. It's a great value for the price and it will definitely get the job done.
Güde W520/5T Problems and Solutions
the common issues and solutions for the Güde W520/5T miter saw, as reported by experts:
Common Issues
- The saw blade may not be aligned properly. This can cause the saw to bind or make uneven cuts. To check the alignment of the saw blade, follow these steps:
- Turn off the saw and unplug it from the power outlet.
- Remove the saw blade.
- Use a straightedge to check the alignment of the saw blade teeth. The teeth should be parallel to the saw guide.
- If the teeth are not aligned, adjust the saw blade alignment using the adjustment screws.
- Reinstall the saw blade and test the saw.
- The saw blade may be dull. A dull saw blade will make rough cuts and may cause the saw to bind. To sharpen the saw blade, follow these steps:
- Remove the saw blade from the saw.
- Take the saw blade to a qualified sharpening service.
- Once the saw blade is sharpened, reinstall it in the saw.
- The saw may be overheating. This can happen if the saw is used for extended periods of time or if the saw is cutting through very thick material. To prevent the saw from overheating, follow these steps:
- Allow the saw to cool down between cuts.
- Do not overload the saw by cutting through too much material at once.
- If the saw is still overheating, contact a qualified service technician.
Solutions
- Check the alignment of the saw blade.
- Turn off the saw and unplug it from the power outlet.
- Remove the saw blade.
- Use a straightedge to check the alignment of the saw blade teeth. The teeth should be parallel to the saw guide.
- If the teeth are not aligned, adjust the saw blade alignment using the adjustment screws.
- Reinstall the saw blade and test the saw.
- Sharpen the saw blade.
- Remove the saw blade from the saw.
- Take the saw blade to a qualified sharpening service.
- Once the saw blade is sharpened, reinstall it in the saw.
- Allow the saw to cool down.
- Turn off the saw and unplug it from the power outlet.
- Allow the saw to cool down for a few minutes before using it again.
- Do not overload the saw.
- Cut through material that is no thicker than the maximum thickness listed in the saw's owner's manual.
- If you need to cut through thicker material, make multiple passes with the saw.
- Contact a qualified service technician.
- If the saw is still overheating after you have taken the above steps, contact a qualified service technician.
I hope this helps!
Güde W520/5T Manual
Safety Information
- Read and understand all safety instructions before using this product.
- Keep children and bystanders away from the work area.
- Always wear safety glasses and gloves when using this product.
- Do not use this product if it is damaged or malfunctioning.
- Do not overload the product.
- Keep the work area clean and free of debris.
- Do not use this product in wet or damp conditions.
- Disconnect the power before performing any maintenance or cleaning.
Before Use
- Inspect the product for any damage before using it.
- Make sure the product is properly assembled.
- Fill the reservoir with hydraulic oil.
- Test the product to make sure it is working properly.
Troubleshooting
- If the product is not working properly, check the following:
- Is the product properly assembled?
- Is the reservoir full of hydraulic oil?
- Is the product overloaded?
- Is there a blockage in the hydraulic system?
Maintenance
- Keep the product clean and free of debris.
- Inspect the product regularly for signs of wear or damage.
- Replace any worn or damaged parts immediately.
- Change the hydraulic oil every 100 hours of use.
Warranty
This product is warranted against defects in materials and workmanship for a period of one year from the date of purchase.
Contact Information
Güde GmbH & Co. KG Birkichstrasse 6 74549 Wolpertshausen Germany
Additional Information
- The maximum length of wood that can be split by this product is 520 mm.
- The maximum diameter of wood that can be split by this product is 250 mm.
- The maximum weight of wood that can be split by this product is 500 kg.
Thank you for choosing Güde!
Comments
Post a Comment